Skip to content

For multi-site groups

AI for multi-site aged care groups

A group with five homes usually has five slightly different ways of answering the phone, logging an enquiry and chasing a family. AI tools set up once at group level give every site the same process, while each home keeps its own staff, contacts and local detail.

Reviewed 15 November 2026

Operations manager at a group office looking at a screen with several aged care homes listed side by side

In short

AI for multi-site aged care groups works best when it is built once and configured per site.

A central phone and enquiry agent answers for every home, uses each home's own details, and routes calls and enquiries to the right local person or to a central intake team.

The same tools draft family updates, remind staff about open tasks, and pull activity from each site into one group view, so the operations team can compare sites on the same measures. Policies and approved answers are kept in one place and pushed to every site at once. Staff at each home still make every care, admissions and staffing decision.

Groups usually start with one or two pilot sites, fix what the pilot shows, then add the remaining homes one at a time.

The problem with running the same work five different ways

Most aged care groups grew by building or buying homes one at a time. Each home came with its own habits: one site keeps enquiries in a spreadsheet, another in the care management system, a third in the facility manager's inbox. The phone at one home goes to the administration officer until 4.30pm, at another it diverts to the RN on the floor, at a third it rings out.

From the group office this shows up as numbers that cannot be compared. Occupancy differs between sites, but nobody can say whether that is because of local demand, because one home answers enquiries within the hour and another takes three days, or because one site records enquiries and another does not.

The same pattern appears with family communication, policy updates and staff onboarding. Each site does a reasonable job in its own way, and the group cannot see or improve any of it without visiting.

  • Enquiries recorded in different places, or not recorded at all
  • Different after-hours phone arrangements at each home
  • Policy changes that reach some sites weeks after others
  • Group reports that rely on each site manager filling in a spreadsheet
  • Induction and training content that varies from home to home

Central intake and a group contact centre

Many groups want a central intake team so that one skilled person handles admissions enquiries for several homes, sees the vacancy picture across the group and can offer a family a place at a nearby home if the first choice is full. AI makes this practical for groups that cannot staff a full contact centre.

An AI phone agent can answer each home's existing number with that home's name, collect the same intake details every time (who the care is for, assessment status, type of care, timing, preferred location) and send a structured summary to the central intake team. Calls that are local by nature, such as a family member asking for the nurse in charge, still go to the home. Urgent calls go to the on-call person for that site.

Web enquiries from each home's page land in the same place in the same format. The intake team works from one list instead of five inboxes, and every enquiry gets the same follow-up reminders regardless of which home it came through.

What sits centrally and what stays local
WorkSet centrallyStays with each home
New admissions enquiriesIntake questions, follow-up reminders, reportingTours, the conversation with the family, local knowledge
Family calls about a residentCall handling rules and message formatNurse in charge or care manager who calls back
After-hours urgent callsEscalation logic and backup listsOn-call RN or manager for that home
Approved answers (visiting, parking, mail)Template and review cycleThe local details in each answer
Policies and proceduresSingle source, version controlLocal procedures where a site differs

Consistency without forcing every site to be identical

Homes in a group do differ for good reasons. A home with a secure memory support unit has different visiting arrangements. A rural site may have different on-call cover. A home serving a particular cultural community may need calls answered in another language.

The practical approach is a group template with local settings. The group sets the call flow, the intake questions, the escalation rules and the format of every summary. Each home fills in its own details: address and parking, visiting hours, on-call roster, local contacts and any extra questions. When the group changes the template, every home gets the change. When a home changes its visiting hours, only that home changes.

This also gives the quality team something concrete to audit. Instead of asking each site how it handles after-hours calls, they can read the configuration and the call summaries.

Talk through your service

A free 30-minute video call. We look at your call volumes, systems and where staff time goes, and tell you whether AI is the right next step. No resident information needed.

Group-level reporting from the work itself

Group reports in aged care are often built by hand: each facility manager fills in a monthly template, the operations team consolidates it, and the figures are a few weeks old by the time the executive or board sees them.

When calls, enquiries and follow-ups run through the same tools at every site, the activity data is already in one format. A group dashboard can show, for each home, the number of new enquiries, how quickly each received a first response, how many became a tour or assessment, after-hours call volumes and the share that needed escalation. These are operational measures, drawn from the work as it happens, and they let the group compare sites fairly.

Clinical and quality indicators, care minutes and financial reporting stay in the systems built for them. AI can help draft the narrative around those numbers for a board pack, but the figures come from your own systems and are checked by the people accountable for them.

Aged care board members reviewing a printed report around a meeting table

Rolling out a policy change across every site

When a group updates a policy, the hard part is making sure every staff member at every site knows what changed. Emailing a new PDF to facility managers rarely achieves that.

A policy knowledge assistant holds the group's current policies and procedures and answers staff questions in plain language, with a link to the source document. When a policy changes, the assistant is updated once and every site gets the same answer the same day. The group can also see which topics staff ask about most at each site, which is a useful signal about where training is needed.

The assistant only answers from the documents you load. It does not make up procedures, and anything it cannot answer from those documents is referred to the relevant manager.

Governance for AI across a group

Under the strengthened Aged Care Quality Standards, the governing body of a provider in registration categories 4 to 6 is expected to oversee all parts of the provider's operations and make sure current policies and procedures are in place for how workers do their roles (Outcome 2.3, as described by the Aged Care Quality and Safety Commission, November 2026). AI tools used across a group fall inside that oversight.

In practice this means a short AI register kept at group level: what each tool does, which sites use it, what data it touches, where that data is stored, who approved it and when it was last reviewed. Changes to call scripts, escalation rules or approved answers go through the same sign-off as any other procedure change.

Privacy is handled once for the group and applied to every site. Health information about residents and clients is sensitive information under the Privacy Act, so the tools are configured not to disclose anything about a resident to a caller, and the group privacy officer gets a written map of where each type of data goes.

What to measure across sites

Pick a small set of measures that every site reports the same way, take a baseline from each site before go-live, then compare month by month. For example, if a group of four homes receives 240 admissions enquiries a quarter and the median time to first response is 26 hours, a target of under 4 hours for every site is concrete and easy to check.

  • Median time from enquiry to first response, per site
  • Share of calls answered, by site and hour of day
  • Enquiries that became a tour or assessment, per site
  • Urgent after-hours calls and time to reach the on-call person
  • Staff questions to the policy assistant that could not be answered

How it works in practice

  1. 1

    Map how each site works now

    We look at phones, enquiries, family communication and reporting at each home and identify where the group most needs consistency.

  2. 2

    Agree the group template

    Operations, quality and site managers sign off the call flow, intake questions, escalation rules and summary formats that every site will use.

  3. 3

    Pilot at one or two sites

    The pilot sites go live with their local settings. We review summaries weekly and fix anything that does not suit how the homes really work.

  4. 4

    Add sites one at a time

    Each additional home goes live after its local details are loaded and its staff have made test calls. No big-bang switch.

  5. 5

    Turn on group reporting

    Once several sites are live, the group dashboard shows the agreed measures side by side, with the baseline for each home.

Common questions

Can one AI phone agent answer for several aged care homes?

Yes. Each home keeps its own phone number, and the agent answers with that home's name and uses that home's details, on-call list and routing rules. The configuration is shared, so a change to the group process applies to every site at once.

Do we need a central intake team before using AI?

No. AI can send enquiries straight to each home if that is how you work. It can also be a step towards central intake, because it puts every enquiry from every site into one format and one list.

How long does a multi-site rollout take?

It depends on the number of sites and how different they are. The usual pattern is a pilot at one or two homes for four to six weeks, then one site at a time once the template is settled. We give a timeline after the free assessment.

Can it connect to our care management or CRM system?

Possibly. Connections to named systems are custom work quoted separately, because what is possible depends on each system's API. Most groups start with summaries going to shared inboxes or a Teams channel per site and add system connections later.

Who is accountable for AI decisions across the group?

The AI does not make care, admissions or staffing decisions. Staff at each site do. The group governing body oversees the tools as part of its normal oversight of operations, with a register of what each tool does and who approved it.

What if one of our homes works quite differently?

That home gets its own local settings within the group template, such as extra intake questions, a different on-call arrangement or another language. The group still sees its activity in the same format as every other site.

Sources and further reading

Related pages

AI Governance for Aged Care Boards

Directors of aged care providers already carry legal governance duties for quality and safety. AI is now part of the operations those duties cover, and boards need a simple, regular way to oversee it.

Reporting Automation

Quarterly financial reports, care minutes, quality indicators, board packs: much of an aged care finance and quality team's quarter goes into pulling data out of several systems, checking it and putting it into the right format. Automation can do the gathering and checking so your people spend their time on review and sign-off.

Policy Knowledge Assistant

Your policies and procedures run to hundreds of pages across shared drives, intranets and binders. A private AI assistant lets a care worker on night shift ask a plain question and get an answer drawn from your documents, with a link to the exact policy it came from.

Enquiry to Admission

A family looking for a place usually calls several homes in the same week, often while a parent is in hospital. The home that answers, follows up and keeps the paperwork moving is the one most likely to admit them. AI handles the follow-up so your admissions staff can concentrate on the family.

Talk it through with us

A free 30-minute video call about where admin time goes in your service and which task is worth automating first. No obligation, and no resident information needed.

Call Book free assessment